Description of «M» and «U» Roll Forming Machine

Brief Introduction

The roll forming machine «M» and «U» from Somundy is the result of more than 20 years of experience and is designed to manufacture high quality light steel posts and rails in a variety of sizes and thicknesses. Likewise the process of forming technology «M» and «U» of the roll forming machine employs material of feeding of lathe, roll former, straightening, products cut to full length, as well as also the components of the forming machine of rolls «M» and «U» which consist of an unwinder of the main machine, a part of straightening and a part cut longitudinally among other technical aspects.

Stud forming machine:
• Working speed:12-15m/min (exclude punching and cutting)
• Roller stations: 14 stations
• Roller material: GCr15 steel, quenching HRC58-62,surface coated chrome with thickness 0.05mm
• Main power: 4kw
• Oil pump: 3kw
• Hydraulic: 12Mpa
• Control system: PLC, Panasonic
• Coder: OMRON
• Cutting system: Hydraulic, material:Cr12Mov
• Size: 5500x800x750mm
• Coil thickness: 0.5mm-1.2mm
• Tolerance: 3m±1.5mm
• Transmission: Chain
Main Specifications of Stud Partition Roll Forming Machine:
• Decoiler: Max load 1000kg
• Main Forming Machine
• Portal-type frame style: A3 steel
• Roller Station: 15 sets rollers
• Roller shaft diameter: φ36mm,surface: 200 mm
• Raw material: 0.5mm – 1.3mm, Q195, Q235
• Main motor: 5.5Kw
• Roller: 1 set
• Cutting part: automatic punching cutting style
• Run-out table: roller style
• Control system: PLC
• Max feed material width:<200mm
Contact Us +1(833) SOMUNDY