Description of «C» and «U» Roll Forming Machine

Brief Introduction

The roll forming machine «C» and «U» from Somundy is the result of more than 20 years of experience and is designed to manufacture high quality lightweight steel studs and profiles in a variety of sizes and thicknesses. Our roll forming machines are driven by chains with a hydraulic system for punching and shearing, a chain driven system is more energy efficient than many other systems currently used, resulting in a machine that can really save you some money while at the same time same time is to earn you money. A light steel bolt is the best substitute material for wood in the market today all this is done by using a hot galvanized sheet which allows excellent resistance to corrosion.

Stud forming machine:
• Working speed:12-15m/min (exclude punching and cutting)
• Roller stations: 14 stations
• Roller material: GCr15 steel, quenching HRC58-62,surface coated chrome with thickness 0.05mm
• Main power: 4kw
• Oil pump: 3kw
• Hydraulic: 12Mpa
• Control system: PLC, Panasonic
• Coder: OMRON
• Cutting system: Hydraulic, material:Cr12Mov
• Size: 5500x800x750mm
• Coil thickness: 0.5mm-1.2mm
• Tolerance: 3m±1.5mm
• Transmission: Chain
Main Specifications of Dry Wall Partition Beam / Stud Partition Roll Forming Machine:
• Decoiler: Max load 1000kg
• Main Forming Machine
• Portal-type frame style: A3 steel
• Roller Station: 15 sets rollers
• Roller shaft diameter: φ36mm,surface: 200 mm
• Raw material: 0.5mm – 1.3mm, Q195, Q235
• Main motor: 5.5Kw
• Roller: 1 set
• Cutting part: automatic punching cutting style
• Run-out table: roller style
• Control system: PLC
• Max feed material width:<200mm
Contact Us +1(833) SOMUNDY